09-11-2010, 04:37 PM | #1 |
Great, great, Have your people call my people
Join Date: Oct 2008
Location: Erie PA
Posts: 3,674
Thanks: 1,039
Thanked 479 Times in 360 Posts
|
where shoudl I start to look rattle up front
I have a rattle in the front suspention. I thought it was coming from the drives side. But I can not reproduce it. Not sure if I cant beause the suspension has pressure on it. But is their any known weak spots up there that may be a possible good place to start to look??
Its a 99 with 117K Any how in the heck do I get the front of this thing up off the gound.. I cant get a freaking jack under it and my ramps are too steep and they are the lowest angle I could find. Maybe some 2X10's on the ramps?
__________________
Kyle Disclaimer: All posts are meant with the utmost respect. Most posts by user “Shark Attack” are meant to spark a giggle. You feel you may have been offended. Please return the offending post and re-read the post slowly with a light heart. If you still fail to see the humor… Well you are SOL many crashes are caused by simply running into the ground,-Docmirror 99/996/911 Aero. I also have a very strong respect for the 928. |
09-11-2010, 05:34 PM | #2 |
Dazed and Confused
Join Date: Nov 2009
Location: Dayton, Ohio
Posts: 968
Thanks: 271
Thanked 259 Times in 202 Posts
|
For the 964 you can jack at the rear jack points (with rear tires on wood) to get the front up enough to slide jack stand under there. When using ramps I drive up on scrap wood and it's just enough to slide the ramps under there. No idea on the noises...sorry.
__________________
Travis 1993 964 Oak Green Metallic C2 Targa Daily Drivers: 2005 Civic EX; 2008 Pilot VP The Ultimate 964 Targa Thread |
09-11-2010, 09:08 PM | #3 |
Master of Disaster - at least this week...
Join Date: Apr 2009
Location: Ottawa, ON, Canada
Posts: 1,992
Thanks: 914
Thanked 664 Times in 370 Posts
|
Check your sway bar links....
I have a set three 2 x 12s screwed together to create ramps. They seem to work reasonably well.
__________________
Fergus '86 951 - Heidi '05 Subaru Legacy 2.5 Limited - dd '74.5 Triumph TR6 - Restoration project, but I won't take $50 for it! Gone but not forgotten '99 996; '86 944 |
09-14-2010, 10:19 PM | #4 |
Great, great, Have your people call my people
Join Date: Oct 2008
Location: Erie PA
Posts: 3,674
Thanks: 1,039
Thanked 479 Times in 360 Posts
|
thanks guys.
__________________
Kyle Disclaimer: All posts are meant with the utmost respect. Most posts by user “Shark Attack” are meant to spark a giggle. You feel you may have been offended. Please return the offending post and re-read the post slowly with a light heart. If you still fail to see the humor… Well you are SOL many crashes are caused by simply running into the ground,-Docmirror 99/996/911 Aero. I also have a very strong respect for the 928. |
09-17-2010, 04:56 PM | #5 |
Cap'n Insane the Engorged
Reutterwerk Supporter |
tie rods
|
09-28-2010, 03:56 PM | #6 |
User
Join Date: Sep 2010
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
I have had a rattle develop from the cooling lines coming loose from the clamps.
|
Thread Tools | |
Display Modes | |
|
|