05-15-2015, 11:54 AM | #1 |
User
Join Date: Nov 2008
Posts: 109
Thanks: 0
Thanked 5 Times in 4 Posts
|
New 928 Headers with merged collectors
The new headers for the 32v 928 engines are finished and in stock.
These have merged collectors for enhanced HP. Been about a year in development... Here is the webpage for more details: http://www.928motorsports.com/parts/headers.php And some pics... |
05-25-2015, 02:08 AM | #3 |
User
Join Date: Feb 2009
Posts: 39
Thanks: 0
Thanked 1 Time in 1 Post
|
can I take off the bell housing to check my auto for pinch bolt?
|
05-26-2015, 11:12 AM | #4 |
User
Join Date: Nov 2008
Posts: 109
Thanks: 0
Thanked 5 Times in 4 Posts
|
Usually with headers, you may have to loosen (not remove) one side so it can swing a little wide to get the lower bell housing out on early cars. But as this pic shows, even with 3.5" pipes, it is possible to get in there even with the headers and exhaust on.
|
05-27-2015, 11:23 PM | #5 |
Workin' on it
|
Lots of clearance on those. The other pics look tighter than that with the #2 and #6 pipes running below the corners of the block. I'm trying to picture how that looks looking up from under the car.
I'd need the 16V versions anyways.
__________________
1980 928S Euro x2 1987 944 N/A Last edited by GlenL; 05-27-2015 at 11:40 PM. |
Thread Tools | |
Display Modes | |
|
|