View Single Post
Unread 01-26-2010, 12:09 AM   #14
Stromius
Son of a son of a sailor
Stromius is on a distinguished road
 
Stromius's Avatar
 
Join Date: Oct 2008
Seattle, WA area
Posts: 195
Thanks: 68
Thanked 12 Times in 11 Posts
Garage
Send a message via MSN to Stromius
Thumbs up Install - S4

I had a few minutes this evening to install Ken's PorKultch'r :
  1. Remove 2 13mm bolts and plate
  2. S4's have spacers under the stock plate, retain these. Not sure of pre/post S4's
  3. Undo circlip and washer on the clutch rod and the pedal and remove rod
  4. Be careful of the clutch pedal with the clutch assist spring..basically it's a great finger cracker w/o the clutch rod
  5. Fit the new bracket with spacer, bolts and washers. I started with 1 cm of adjustment. Use a small 10mm wrench (spanner) to tighten the stop nut once desired stop is achieved.
  6. Tighten to 17 ft/lbs and reconnect clutch rod
Done 8 minutes total. Will post up more on driving tomorrow.
Attached Images
File Type: jpg IMG_6143.jpg (264.2 KB, 20 views)
File Type: jpg IMG_6144.jpg (264.8 KB, 16 views)
File Type: jpg IMG_6146.jpg (249.8 KB, 14 views)
File Type: jpg IMG_6147.jpg (259.4 KB, 13 views)
File Type: jpg IMG_6149.jpg (266.0 KB, 13 views)
__________________
Stefan

88 928 S4 - 5 speed : X pipe/hi flo cats / Black Sea rear muffler / Venetian Blue / Blue&Champagne
Stromius is offline   Reply With Quote