Quote:
Originally Posted by GlenL
... Setting the suspension height now using my "locally made" gauge sticks. Measuring to the official spots on the bottom of the suspension is hard. With these I do it by feel. I'm setting the front to 155mm and the rear to 160mm. ...
|
Sticks work but I always worried about whether I was measuring straight up and down or a little canted
I found the kind of tool below very useful. Tighten the wing nut and push the device under/across the measuring flat and it will "set" to the height. Pull it out and you can measure easily, with good access.
https://www.harborfreight.com/multi-square-1701.html